Table of Contents
Advertisement
Delaying Netfinity Manager startup on OS/2 systems
Getting more information about Netfinity Manager
122
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
discovered, use Update Connector Manager to apply updates to your systems
remotely. Updates can be applied to individual systems, or you can apply multiple
updates to multiple systems, all from Netfinity Manager. You can also use Update
Connector Manager to remove previously applied updates. Update Connector
Manager also includes a scheduler that you can use to discover, apply, or remove
updates automatically and periodically.
Web Manager Configuration
Use the Web Manager Configuration service to limit access to the Netfinity Manager
for Web to user-specified TCP/IP host or ranges of TCP/IP host addresses. Enable or
disable the Netfinity Manager for Web and specify the TCP/IP port number to which
the Netfinity Manager Web server functions.
In some cases, it might be necessary for you to delay the automatic startup of the
Netfinity Manager Network Interface (NETFBASE.EXE) in order to allow other time-
sensitive applications to start up correctly or to allow your system to fully configure
itself prior to beginning network operations. NETFBASE.EXE includes a parameter
(WAIT) that you can use to specify the number of seconds that NETFBASE.EXE will
wait before starting.
During Netfinity Manager installation, the Netfinity Manager Network Interface
object is placed in the Startup folder. To configure Netfinity Manager to wait a
specified number of seconds before starting:
1.
Shut down the Netfinity Manager Network Interface if it is running.
2.
Open the Startup folder.
3.
Using the right mouse button, click the Netfinity Manager Network Interface
object. This will open the Netfinity Manager Network Interface context menu.
4.
Click Settings to open the Netfinity Manager Network Interface Settings
notebook.
5.
In the Parameters field type
x
where x is the number of seconds that you want the Netfinity Manager Network
Interface to wait before starting.
6.
Close the Netfinity Manager Network Interface Settings notebook.
With the WAIT parameter set to x, whenever you start your system, the Netfinity
Manager Network Interface will wait x seconds before starting.
Note: This feature is available only on systems that are running OS/2.
Complete information on how to use Netfinity Manager (as well as Client Services for
Netfinity Manager) is included in Adobe Acrobat format on the Netfinity Manager
CD.
The \DOCS subdirectory contains the following files:
Advertisement
Table of Contents
Troubleshooting
