IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual page 237

Error Code/Symptom
114 (Adapter read-only memory error)
129 (Internal cache error)
151 (Real time clock error)
161 (Real time clock battery error)
162 (Device Configuration Error)
Note: Be sure to load the default settings
and any additional desired
settings; then, save the configura-
tion.
163 (Real-Time Clock error)
164 (Memory configuration changed, see
"Memory Settings" on page 47.)
175 (Hardware error)
176(Computer cover or cable cover was
removed without a key being used)
177, 178 (Security hardware error)
184 (Power-on password corrupted)
(Drive startup sequence
185
information corrupted)
(Security hardware control logic
186
failed)
187 (VPD serial number not set.)
188 (Bad EEPROM CRC #2)
189 (An attempt was made to
access the server with invalid passwords)
1. Failing adapter
2. Run diagnostics
1. Processor
2. Optional processor (if installed)
3. Processor/PCI board
1. Run Diagnostics
2. Battery
3. I/O Legacy Board
1. Run Configuration/Setup
2. Battery
3. I/O Legacy Board
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. I/O Legacy Board
1. Run Configuration/Setup
2. Battery
3. I/O Legacy Board
1. Run Configuration/Setup
2. DIMM
3. Processor/PCI Board
1. I/O Legacy Board
2. Processor/PCI Board
1. Run Configuration/Setup
2. I/O Legacy Board
3. C2 Security Switch
1. Run Configuration/Setup
2. I/O Legacy Board
1. Run Configuration/Setup
2. I/O Legacy Board
1.
Run Configuration/Setup
2. I/O Legacy Board
1.
Run Configuration/Setup
2. I/O Legacy Board
1. Set serial number in Setup
2. I/O Legacy Board
1. Run Configuration/Setup
2. I/O Legacy Board
1. Run Configuration/Setup, enter the administrator password
2. I/O Legacy Board.
FRU/Action
Symptom-to-FRU index
227