Table of Contents
Advertisement
Using the SCSISelect utility program
Starting the SCSISelect utility program
Table 7. Power-on and administrator password features.
Type of password
Power-on password
Administrator
password
Administrator and
power-on password
SCSISelect is a built-in, menu-driven configuration utility program that you can use
to:
•
View the default SCSI IDs
•
Locate and correct configuration conflicts
•
Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
and descriptions of the menu choices available.
Note: If the server/workstation has a RAID adapter installed, use the configuration
method supplied with the RAID adapter to view or change SCSI settings for
attached devices.
To start the SCSISelect utility program:
1.
Turn on the server/workstation.
2.
When the <<< Press <CTRL><A> for SCSISelect™ Utility! >>> prompt appears,
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you to
enter the password to start the SCSISelect Utility program.
3.
Use the arrow keys to select a choice from the menu.
•
Press Esc to return to the previous menu.
•
Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
•
Enter the password to complete the system startup.
•
A limited set of choices is available on the
Configuration/Setup Utility main menu.
•
No password is required to start the system.
•
Enter the password to access the Configuration/Setup Utility
program.
•
All choices are available on the Configuration/Setup Utility
main menu.
•
You can enter either password to complete the system startup.
•
The administrator password provides access to all choices on
the Configuration/Setup Utility main menu. You can set,
change, or delete both the administrator and power-on
passwords, and allow a power-on password to be changed by
the user.
•
The power-on password provides access to a limited set of
choices on the Configuration/Setup Utility main menu. This
limited access might include changing or deleting the power-
on password.
Results
Configuration
33
Advertisement
Table of Contents
