Viewing Merge Group Numbers And Other Cluster; Information; Post (Ispr) Error Codes And Procedures; Serveraid-4 Controller Error Codes/Messages - IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual

Viewing merge group numbers and other cluster information

POST (ISPR) error codes and procedures

ServeRAID-4 Controller error codes/messages

180
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
To view the merge group numbers and other cluster information, do the following:
1. In the Main Tree, click the controller you are using for the cluster.
2. Click
Figure 18. Configure controller for clustering window
Note: In this case, you can view this information only. You cannot change the

information.

This section lists the ServeRAID-4 controller error codes/messages, and the error
procedures.
The error codes/messages are displayed on the screen in a line of text immediately
after the adapter BIOS version.
If POST detects changes in the controller configuration or detects a controller
hardware problem, messages appear on the screen. Refer to "POST (ISPR) error
procedures" on page 182 and correct the problem.
If there is no POST Error or Configuration Error message, the BIOS screen resembles
the sample shown below. Note that your version may be different from the one
shown.
on the tool bar. A window similar to the following opens.