General information
Features and specifications
© Copyright IBM Corp. 1999, 2000
The IBM® Netfinity® 7600 server is a high-performance server with the capability of
microprocessor upgrade to a symmetric multiprocessing (SMP) server. It is ideally
suited for networking environments that require superior microprocessor
performance, efficient memory management, flexibility, and large amounts of reliable
data storage.
Performance, ease of use, reliability, and expansion capabilities were key
considerations during the design of the server. These design features make it possible
for you to customize the system hardware to meet your needs today, while providing
flexible expansion capabilities for the future.
The IBM Netfinity 7600 server comes with a three-year limited warranty and 90-Day
IBM Start Up Support. If you have access to the World Wide Web, you can obtain up-
to-date information about the server model and other IBM server products at the
following World Wide Web address: http://www.ibm.com/pc/us/netfinity/
The following provides a summary of the features and specifications for the Netfinity
7600 server.
•
Microprocessor:
— Intel® Pentium®III Xeon™
— 32 KB of level-1 cache
— 1 MB of Level-2 cache (min.)
— Expandable to four microprocessors
•
Memory:
— Maximum: 16GB
— Type: ECC, SDRAM, Registered DIMMs
— Slots: 4-way interleaved, 16 slots
•
Drives standard:
— Diskette: 1.44 MB
— CD-ROM: 40X IDE
•
Expansion bays:
— Hot-swap: 10 slim high or 7 half high
— Non-hot-swap: Two 5.25-inch
•
PCI expansion slots:
— Four 33 MHz 64-bit
— Two 66 MHz 64-bit
•
Hot-swap power supplies:
250 W (115-230 V ac)
— Minimum: Three
— Maximum: Four
•
Redundant cooling:
— Four hot-swap fan assemblies
•
Video:
3