Cabling the server
Installing the server in a rack
You can attach a dedicated modem to the D-shell system-management connector on
the rear of the server to communicate with the integrated Netfinity Advanced System
Management Processor.
The ASM Interconnect function uses the RJ-45 system-management connectors. This
function enables you to connect the Advanced System Management Processors of
several rack-mounted servers so that they can communicate with each other in half-
duplex mode.
Refer to the following illustration for the location of input and output connectors.
Refer to the following illustration for an example of proper cable routing.
Refer to the Rack Installation Instructions for rack installation and removal instructions.
93
Installing options