Table of Contents
Advertisement
where:
fff
ttt
iii
date
cc
text message
Text messages
The diagnostic text message format is as follows:
where:
Function Name
is the name of the function being tested when the error occurred. This
corresponds to the function code (fff) given in the previous list.
Result can be one of the following:
Passed This result occurs when the diagnostic test completes without any
Failed This result occurs when the diagnostic test discovers an error.
User Aborted
Not Applicable
Aborted This result occurs when the test could not proceed because of the
Warning This result occurs when a possible problem is reported during the
Test Specific String
This is additional information that you can use to analyze the problem.
Starting the diagnostic programs
You can press F1 while running the diagnostic programs to obtain
You also can press F1 from within a help screen to obtain online documentation from
which you can select different categories. To exit
off, press Esc.
To start the diagnostic programs:
1.
Turn on the server and watch the screen.
is the three-digit function code that indicates the function being
tested when the error occurred. For example, function code 089 is for
the microprocessor.
is the three-digit failure code that indicates the exact test failure that
was encountered.
is the three-digit device ID.
is the date that the diagnostic test was run and the error recorded.
is the check digit that is used to verify the validity of the information.
is the diagnostic message that indicates the reason for the problem.
errors.
This result occurs when you stop the diagnostic test before it is
complete.
This result occurs when you specify a diagnostic test for a device that
is not present.
system configuration.
diagnostic test, such as when a device that is to be tested is not
installed.
information.
and return to where you left
Diagnostics
25
Advertisement
Table of Contents
Troubleshooting
