2.
3.
108
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
and then press Enter.
Note: Specify PUBLIC or authorize only specific manager systems. To limit
access to the database, substitute the authorization name of the managing
system for PUBLIC.
Use the CONNECT RESET command to disconnect current users from the
database.
Type the following command at the OS/2 prompt:
and then press Enter.
Use the NETFINDB GRANT command to grant (or revoke) database privileges.
To grant or revoke table privileges on OS/2:
a.
Insert the Netfinity Manager CD into the CD-ROM drive (in this example,
drive D; individual drive letters might be different).
b. Make the CD-ROM drive the active drive.
Type
and then press Enter.
c.
Type the following command:
privilegecode
where
•
id is the user ID to be granted access
•
databasename is the name of the database as specified during NETFINDB
execution
•
privilegecode is one of the following privilege codes:
— ALL
— ALTER
— CONTROL
— DELETE
— INDEX
— INSERT
— REFERENCES
— SELECT
— UPDATE
d. Press Enter to execute the command.
Note: Use PUBLIC or authorize only a specific ID or group name. Netfinity
Manager update programs use the DB2SQLC0 package and do not
require specific table privileges.
To revoke privileges, substitute REVOKE for GRANT in the command line.
To configure Netfinity Manager to discontinue export data through ODBC for use
on DB2, refer to "ODBC database support" on page 111.
id
databasename