You can attach internal SCSI devices to the Channel 1 connector. You can attach
external SCSI devices to the Channel 1 connector.
Note: The ServeRAID-4L controller does not support configurations that use both
Note: The ServeRAID-4L controller uses the module (P/N 38L3386) containing a
CAUTION:
When replacing the lithium battery, use only IBM Part Number 38L3386 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
•
•
•
Dispose of the battery as required by local ordinances or regulations.
142
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
Internal Channel 1
External Channel 1
Figure 2. ServeRAID-4L controller
the internal and external connectors on the same channel concurrently. For
example, you cannot use both external Channel 1 and internal Channel 1.
lithium battery.
Throw or immerse into water.
Heat to more than 100 C (212 F)
Repair or disassemble