Lines/Trunks; Identifying Line/Trunk Jacks - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

Identifying Line/Trunk Jacks

Identifying Line/Trunk Jacks
Identifying line/trunk jacks consists of the following tasks:
1. Determining which line/trunk jack types are available according to the
types of modules in the control unit
2. Matching incoming trunks to the jacks that support them
3. Designating jacks for auxiliary equipment (if any)
This section contains instructions for completing all of these tasks.
Forms Needed
Form 1, System Planning
Form 2c, System Numbering: Line/Trunk Jacks
You also need the local telephone company's line/trunk information.
3–2

Lines/Trunks