Forced Account Code Entry; Microphone Operation - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

Telephone and Extension Features
NOTE:
Setting this option to Outward Restrict or Toll Restrict does not allow reliable toll
restriction on telephone company lines/trunks that do not require 1 or 0 for toll
calls. The Toll Type setting of 1 or 0 allows the system to classify calls as either
local or toll, based on the number a user dials. Dialing a prefix depends on local
telephone company requirements and the type of trunk being used. The system
must be programmed to designate whether or not to restrict users from dialing
calls to certain areas. The Toll Type feature does not apply to tie trunks or DID
trunks.
To restrict the extension from making outside calls so only intercom calls can be
made, check the Outward Restriction column.
To restrict the extension from making toll calls so only intercom and local calls
can be made, check the Toll Restriction column.

Forced Account Code Entry

This section contains instructions for setting up the system to associate calls
with corresponding accounts, clients, or projects for billing and accounting
purposes.
Planning Form Instructions
Use Form 6b to identify extensions requiring forced Account Code Entry. Under
the Forced Account Code Entry heading on Form 6b, do one of the following:
To allow users to make calls without entering an account code, check the
No (factory setting) box.
To require users to enter an account code, check the Yes box.

Microphone Operation

This section contains instructions to disable the microphones on MLX
telephones when they are used in areas where use of the speakerphone is
disruptive.
NOTE:
The microphones on analog multiline telephones cannot be disabled.
Planning Form Instructions
Under the Microphone heading on Form 6b, do one of the following:
To allow speakerphone use (factory setting), check Enable.
To prevent speakerphone use, check Disable.
4–5
Features