Transfer Options - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

System Features
Form 10a, Label Form: Posted Message
Form 10b, System Speed Dial

Transfer Options

This section contains instructions for setting the following Transfer feature
options to allow users to transfer outside or inside calls to another telephone:
Transfer Return Interval
One-Touch Transfer
Transfer Audible
Type of Transfer
NOTE:
Transfer features, and any other feature that requires more than one SA button,
can be disabled on Single-line telephones by removing all but one SA button
through centralized programming. Refer to Form 4f, Tip/Ring Equipment.
Planning Form Instructions
NOTE:
If the system includes AUDIX Voice Power/Fax Attendant System, Integrated
Administration automatically sets the Return Time Interval to 6. If the system
does not include integrated administration, but does have a voice mail system,
the interval should be set to a value greater than 4 so that the voice mail system
will get the call first.
1. Under the Return Time Interval heading in the Transfer Options section of
Form 8a, do one of the following:
To keep the factory setting, check the 4 rings box.
To indicate no return for transferred calls, check the 0 rings box.
To change the factory-set number of rings, check the third box and
write the number of rings (1 through 9) in the space provided.
2. Under the One-Touch Call Handling heading, do one of the following:
To keep the factory setting, check the One-Touch Transfer box and
do one of the following:
— Check the Automatic Completion box to keep the factory-set
— Check the Manual Completion box to change the factory setting to
To change from One-Touch Transfer to One-Touch Hold, check the
One-Touch Hold box.
4–32
Features
automatic completion of transfers.
manual completion.