Call Waiting - AT&T MERLIN LEGEND Release 4.0 Feature Reference

Feature Reference

Call Waiting

At a Glance
Users Affected
Reports Affected
Mode
Telephones
Programming Codes
On
Off
Feature Code
MLX Display Label
Factory Setting
Description
When an extension is programmed with Call Waiting, a user hears a tone when
his or her extension is busy, the user is off hook, and another call is received.
For an inside call, the user hears one beep; for an outside call, the user hears
two beeps. MLX display telephone users also see
The caller hears a special ringback to indicate that the extension is busy and
that the call-waiting tone has been sent.
A multiline telephone is considered busy when no SA or ICOM button is
available for incoming calls and, if Coverage is programmed, all coverage
points are busy.
When the called party frees an SA or ICOM button and there is a call waiting,
the caller hears dequeuing tone and the call waiting call appears on the free SA
or ICOM button of the called party.
A single-line telephone is considered busy when a call rings on the telephone or
the user lifts the handset and, if Coverage is programmed, all coverage points
are busy.
Each extension can be programmed with Call Waiting on or off. The default is
Call Waiting off.
Telephone users, DLC operators
Extension Information
All
All except QCC
(for call-waiting pickup)
[
[
Off
]
]
on the display.
Call Waiting
91