AT&T MERLIN LEGEND Release 4.0 Feature Reference page 258

Feature Reference
Display
continued
Do Not Disturb
Forced Account
Code Entry
Group Calling
Multi-Function
Module
Night Service
Paging
258
Forward and Follow Me
When an MLX display telephone user turns Follow Me on or off, the
display prompts for the forwarding extension. After the feature is turned
on, the message
appears.
If an MLX display telephone user enters an invalid destination while
turning on Forward, the display clears. If a user enters an invalid
extension while turning on Forward, Remote Call Forwarding, or
Follow Me at an analog multiline display telephone, the display shows
.
Calls are not forwarded to a destination extension that has Do Not
Disturb turned on; the call rings only at the forwarding telephone as
described in Table 20. Turning on Do Not Disturb at the forwarding
extension does not prevent the calls from being forwarded.
In Release 4.0, turning on Do Not Disturb at a forwarding extension
causes calls to be forwarded immediately. The Forwarding Delay does
not have an effect.
Telephones with Forced Account Code Entry assigned can forward calls
only to extensions and not to outside telephone numbers. If Forced Account
Code Entry is activated at an extension, the extension cannot use Remote
Call Forwarding to program an outside number. If the extension already has
Remote Call Forwarding on with an outside number programmed when
Forced Account Code Entry is activated, then Remote Call Forwarding is
overridden and calls ring only at the extension.
An available calling group member is automatically logged out when the
member forwards his or her calls. If a calling group member logs in
while calls are being forwarded, Forward or Remote Call Forward is
automatically canceled.
Calls cannot be forwarded to a calling group.
When a trunk programmed to ring into a calling group is assigned as a
personal line on a principal user's telephone, an incoming call received on
the personal line is not sent to the calling group if the principal user forwards
calls to an outside telephone number through Remote Call Forwarding.
Forward (including Remote Call Forward) and Follow Me should not be
used on an MFM because the user does not have an LED that indicates
when the feature is active.
When Night Service is turned on, calls arriving for a Night Service group
member can be forwarded to an extension using Forward or Follow Me.
However, calls cannot be forwarded to an outside telephone number
using Remote Call Forward.
Calls cannot be forwarded to a paging group. The trunk number used to
connect loudspeaker paging equipment cannot be used to forward
calls to outside telephone numbers.
appears. After the feature is turned off,