AT&T MERLIN LEGEND Release 4.0 Feature Reference page 378

Feature Reference
All Other Multiline Telephones
To receive pages, analog multiline telephones must have Voice Announce to
Busy on, and MLX telephones must have Voice Announce on; these are the
factory settings. For analog multiline telephones, turning on the feature also
requires assigning two consecutive jacks to the telephone: one for normal calls
and another for pages.
To direct Speakerphone Paging to an individual extension, select an SA Voice
or ICOM Voice button, dial the extension number, and speak into the handset or
speakerphone. To direct Speakerphone Paging to a group of extensions or to all
extensions by using Page All, select any SA or ICOM button, press the
programmed Group Page button or dial the extension for the speakerphone
paging group or Page All group, and speak into the handset. (Using a
speakerphone for a group page can cause feedback.
A multiline telephone user can access the loudspeaker paging equipment and
make an announcement through Loudspeaker Paging in the following ways:
Select a line button programmed for the line jack on which the
loudspeaker paging system is connected.
Select an SA button and dial the pool dial-out code for the loudspeaker
paging jack.
Select an SA or ICOM button (either by pressing a Pickup button
programmed specifically for the paging line or pressing the Feature
button), and then dialing
(801–880).
Select
and dial the line number (801–880).
Once the loudspeaker paging system is accessed, dial the assigned code
number for the paging zone (if required by the loudspeaker paging system) and
speak into the handset.
Single-Line Telephones
Single-line telephones cannot receive pages, even if they have speakerphones.
Consequently, they cannot be included as members of a speakerphone paging
group.
Single-line telephones cannot be used to make or receive voice-announced
inside calls (Speakerphone Paging directed to an individual extension). To
direct Speakerphone Paging to a group of extensions or to all extensions by
using Page All, lift the handset, while listening to inside dial tone dial the
extension for the paging group or Page All group, and speak into the handset.
378
Paging
followed by the paging line number

from the display (MLX display telephones only)