AT&T MERLIN LEGEND Release 4.0 Feature Reference page 182

Feature Reference
Table 9. Results of Pressing DSS Button While Active on a Call: DLC Position with
One-Touch Transfer
Extension Type
Individual or calling group
Pool dial-out code or ARS
code
Paging group
Park zone
Line/trunk number, Listed
Directory Number,
unassigned extension
numbers, Dial 0 calls
182
Direct Station Selector: MLX
Result
The caller is put on hold, Transfer is initiated, an SA or ICOM
button is selected automatically, and the extension number is
dialed automatically. If manual completion is programmed,
the operator must press another button or hang up to
complete the transfer. If automatic completion is
programmed, the transfer is completed automatically.
The caller is put on hold, Transfer is initiated, the pool
dial-out code is automatically dialed, and the operator can
then dial the outside telephone number. Transfer completion
is always manual; the operator must press another button or
hang up to complete the transfer, regardless of whether the
system is programmed for manual or automatic completion.
The caller is put on hold, an SA or ICOM button is selected
automatically, and the paging group extension number is
dialed automatically. Transfer is not completed automatically,
regardless of whether the system is programmed for
One-Touch Hold or One-Touch Transfer, because calls
cannot be transferred to a paging group.
The Park feature is activated and the call is put on hold in the
selected park zone to allow Pickup from any extension in the
system.
Ignored, no effect