AT&T MERLIN LEGEND Release 4.0 Feature Reference page 510

Feature Reference
Since the type of line button (personal line, SA, or ICOM) used to make the call
is not stored, select the appropriate line button before using Saved Number Dial
to redial a number.
The green LED next to the programmed Saved Number Dial button does not go
on when the feature is used.
Saved Number Dial saves whatever you dial, whether the number is valid or not.
NOTES:
1. If you dial a telephone number and, after the call is connected, dial
additional digits, such as an account number or password, Saved
Number Dial saves all the digits, including those dialed after the call is
connected (up to a total of 16).
2. If someone presses the Saved Number Dial button, all dialed digits are
shown on the display of a display telephone, including confidential
information such as passwords or account codes. Do not use Saved
Number Dial with sensitive information.
If the number dialed with an outside Auto Dial button or Personal Speed Dial
code includes a special character such as Pause or Stop, the special character
does not work when the number is redialed by Saved Number Dial.
Mode Differences
Behind Switch
When you manually dial an outside number that includes a dial-out code, for
example, an Automatic Route Selection (ARS) or pool dial-out code required by
the host system, the Pauses required to wait for dial tone from some host
systems are not automatically stored when Saved Number Dial is used. As a
result, you may either hear a fast busy signal or reach a wrong number when
redialing the stored number using Saved Number Dial.
Key Mode
In Key mode, Saved Number Dial cannot be used on an analog multiline
telephone unless a Feature button or Saved Number Dial button is programmed
on the telephone. Saved Number Dial cannot be activated by pressing
entering the feature code. The programmed Feature button must be used
instead.
510
Saved Number Dial
and
#