Mode - AT&T MERLIN LEGEND Release 4.0 Feature Reference

Feature Reference
Direct Station Selector: MLX
At a Glance
Users Affected
Reports Affected

Mode

Telephones
System Programming
Maximums
Factory Settings
Page 1 button
Page 2 button
Page 3 button
Description
One or two Direct Station Selectors (DSSs) can be connected to an MLX-20L or
MLX-28D telephone assigned as an operator position. The DSS enhances the
call-handling capabilities of an operator with a Direct-Line Console (DLC) or a
Queued Call Console (QCC). When connected to an MLX-20L telephone used
as a system programming console, the DSS facilitates system programming and
centralized telephone programming procedures. When used with the Extension
Status feature or by a calling group or Call Management System (CMS)
supervisor, the DSS allows the user to determine, at a glance, calling group or
CMS group member status or room status.
The DSS provides the following call-handling capabilities or information:
One-touch dialing of inside extensions
One-touch transfer
One-touch hold (DLC only)
On hook, off hook, or Do Not Disturb status of extensions in the system
Extension status indication (room or group member status)
Calling group queue status
Operators
Operator Information
All
MLX-20L, MLX-28D
Assign extension numbers selected when DSS buttons are
pressed:
•
16 DSSs for each system
2 DSSs for each console (1 for each console if 3 or more
consoles in one carrier)
150 extension numbers for each DSS (3 pages of extension
numbers, 50 extension numbers for each page)
Starts with Extension 0
Starts with Extension 50
Starts with Extension 100
More
Direct Station Selector: MLX
177