AT&T MERLIN LEGEND Release 4.0 Feature Reference page 253

Feature Reference
To cancel Forward and Follow Me from other extensions: at the destination
QCC, press the Feature button, select
display, and do one of the following:
To cancel forwarding from one extension, dial that extension number.
To cancel forwarding from all extensions, dial
Other Multiline Telephones
To forward calls to an extension, either press a programmed Forward button
and dial the destination extension number, or press the Feature button, dial
and dial the destination extension number. If off-hook on an SA or ICOM button,
you hear a confirmation tone (double break in dial tone), and then dial tone is
removed. If a programmed Forward button is used, the green LED next to the
button turns on.
To forward calls to an outside telephone number, either press a programmed
Forward button or press the Feature button and dial
trunk or pool on which to route forwarded calls by dialing the Automatic Route
Selection (ARS) or pool dial-out code (Hybrid/PBX mode only), the Idle Line
Access code (usually
number (usually 801–880). Then dial the destination telephone number followed
by a pound sign ( ) to signal the end of the dialing sequence. If off-hook on an
SA or ICOM button, you hear a confirmation tone, and then dial tone is
removed. If a programmed Forward button is used, the green LED next to the
button turns on.
To turn on Follow Me, press the Feature button, dial
telephone's extension. If off-hook on an SA or ICOM button, you hear a
confirmation tone and dial tone is removed. An MLX display telephone user can
also use Follow Me by pressing the Feature button, selecting the feature from
the display, and dialing the forwarding telephone's extension.
To turn off Forward, Remote Call Forward, and Follow Me at the originating
multiline telephone, press the programmed Forward button, or press the
Feature button, dial
"forwarding" calls to that extension). If off-hook on an SA or ICOM button, you
hear a confirmation tone, and then dial tone is removed. If a programmed
Forward button is used, the green LED next to the button turns off.
At a destination (receiving) multiline telephone, to cancel Forward and
Follow Me from other extensions, press the Feature button, dial
of the following:
To cancel forwarding from one extension, dial that extension.
To cancel forwarding from all extensions, dial .
; Key and Behind Switch modes only), or the trunk

, and dial your own extension number (in effect,
(Cancel Follow Me) from the
. Then select the outside
, and dial the forwarding
, and do one
Forward and Follow Me
,
253