Making Changes To Your System Later - AT&T MERLIN 3070 Administration Manual

MAKING CHANGES TO YOUR SYSTEM LATER

Changing system features that were administered from the administrator/attendant
console or programmed at individual voice terminals is a simple process. You just
turn to the section of this manual that gives the procedure for assigning the feature
or option you want, and follow the instructions. The "Quick Reference Guide to Ad-
ministration Procedures" on page 183 provides streamlined instructions for program-
ming systemwide features.
Making basic changes to the way your system operates—that is, changes to the
switch settings on the control unit—is more complicated, since changing a setting
may erase critical system administration that is now is place. Before you change any
switch settings, review the information in "Changing Your System Later," page 27.
Prepare for System Administration
These procedures help you get ready to administer your system.
Decide how people will access outside lines.
Complete and keep handy your System and Voice Terminal Configuration
Forms.
Schedule a time to perform administration procedures.
Perform Basic Administration
Depending on your system requirements, some of these procedures maybe
necessary immediately after your system is installed; you also perform these
procedures whenever you need to change your system later. These procedures
are carried out at the control unit and the administrator/attendant console.
Set your control unit.
Learn how to enter and leave administration mode.
Specify Touch-Tone or rotary signaling.
Set your system to work with the MERLIN Call Management System, if
your business has this automatic call distributor.
Set up a square system, with lines assigned to buttons.
Set up a pooled system, with line pools, line-to-button assignments, and
either Button Access or Dial Access to Line Pools.
6