Making An Outside Call; Making An Intercom Call - AT&T Partner Series Installation And Use Manual

Making an Outside Call

If you lift the handset before
pressing an outside line button,
you will be automatically con-
nected to the first idle line. The
sequence of idle lines to which
you are connected is determined
by the "Automatic Line Selection"
feature. See p. 3-3.

Making an Intercom Call

4-6
Basic Call Handling with PARTNER Phones
To make an outside call:
1. Press any idle line button. (An idle line button is one that is not lit.)
The light next to the line button is steady green.
2.
Lift the handset.
3.
Dial the number.
To dial a Speed Dial number:
1. Press [ ] plus the 2-digit speed dial code (20 to 29).
Feature
The number dials automatically.
2. Lift the handset.
To dial a call on a specific line, press the line button first.
To store a Speed Dial number (which must be done at extension 10), see p. 3-5.
To dial an Auto Dial number:
1. Press the Auto Dial button on which the number is stored.
A line is automatically selected, the speaker comes on, and the Auto Dial number
dials automatically. If you do not care to use the speakerphone, lift the handset.
If you want to call on a specific line, press the line button before pressing the
Auto Dial button.
To store an Auto Dial number on a button, see p. 4-4.
An inside call, or intercom call, is a call to another extension in the PARTNER
system. When you make an intercom call, there are two ways that you can sig-
nal the extension you are calling: by ringing or by voice. A ringing intercom call
causes the called telephone to ring. A voice-signaled intercom call causes the
called extension to beep. After it beeps, the caller can speak, and the caller's
voice will be heard on the called extension's speaker.
To make a ringing intercom call:
1.
Press either [
Intercom
The light next to the [
2.
Lift the handset.
You hear the intercom dial tone.
3 .
Dial the 2-digit extension number.
] button.
] button is green steady.
Intercom