AT&T MERLIN 3070 Administration Manual page 109

Initial Feature Assignments for Nonattendant Voice Terminals
with 1030 or 3070 Configuration in Standard Square Systems
The system automatically assigns your
first eight lines to positions above the dial
pad. If you have fewer than eight lines,
the feature shown on the left of each of
these buttons is assigned.
If you have more than eight lines, you
†
must assign them to the buttons to the
right of the dial pad. The numbers in the
lower right-hand corner of each button in-
dicate the order in which lines are
assigned. If you don't use a button for a
line, you can program a feature on the
button.
106