Programming Voice Announcement Disable 1 2 - AT&T MERLIN 3070 Administration Manual

PROGRAMMING VOICE ANNOUNCEMENT DISABLE
When your system is installed, all voice terminals can receive either announced or
ringing intercom calls. However, some people may not want their intercom calls
signaled by a voice announcement. For some voice terminals, such as those in public
locations, voice announcements may be impractical. Using Voice Announcement
Disable, you can program voice terminals to block intercom voice announcements.
As a result, all intercom calls to those voice terminals ring, even if the callers try to
place an announced intercom call. Use Centralized Voice Terminal Programming
or follow the procedure below to program this feature.
1. Go to the voice terminal you want to program.
2. Slide the T/P switch on the left side of the voice terminal to P .
The voice terminal rings every 5 seconds to remind you it is in program mode.
3. Touch the Intercom-Voice button successively until the green light next to it
shows the appropriate code. Each successive touch gives you one of these codes:
Steady green light on = voice announcements permitted
4. If you have more features to program on this voice terminal, you can do so
otherwise, slide the T/P switch to the center position to return to normal
operation.
Green light off = voice announcement blocked.
125