AT&T MERLIN 3070 Administration Manual page 159

h .
Line Ringing
Of the lines assigned to the voice terminal, determine which ones should
ring immediately at the voice terminal, which should ring after a delay (so
that calls ring only if the person who usually answers is unavailable), and
which should not ring at all. Indicate the type of line ringing on the Voice
Terminal Configuration Form by writing next to each line button "R" for
immediate ringing, or "D" for delayed ringing after three rings. Similarly,
indicate whether cover buttons should ring immediately ("R"), after a
three-ring delay ("D"), or after a six-ring delay ('DD"). If a line shouldn't
ring at the voice terminal, leave the space next to its button blank. Calls
transferred on this line will still ring.
i .
Calling Restrictions
If the voice terminal should be restricted from making toll (long distance)
calls, check "Toll Call Restriction" on the Voice Terminal Configuration
Form. If the voice terminal should be restricted from making any outside
calls, check "Outside Call Restriction."
j.
Allowed-List Assignment
If you are assigning one or more allowed lists (lists of area codes and/or
exchanges that people with restricted voice terminals can call) to the voice
terminal, record the numbers of the lists on the Voice Terminal Configura-
tion Form.
k .
Automatic Line Selection
If lines don't appear on the voice terminal in the order in which they are
most likely to be used, list them in the appropriate order under "Automatic
Line Selection" on the Voice Terminal Configuration Form.
l
Return to box a and repeat this process for each voice terminal in your
system.
156