AT&T MERLIN 3070 Administration Manual page 83

80
6. Repeat steps 3 trough 5 for each paging group in which you want to assign
or remove voice terminals.
7. lf you have a printer, you can get a printout to make sure your paging groups
are set up the way you want them. A typical printout appears below, To order
a printout, dial the 4-character code #903.
The green light next to Adm Mist flashes. When the printout is completed,
you hear a beep and the green light next to Adm Misc becomes steady.
Don't go on to step 8 until you hear the beep or you will get an incomplete
printout, Wait to remove your printout until you have completed step 8 or your
page alignments will be affected.
8. Touch Adm Misc.
The lights next to the administration mode buttons flash again.
9. Continue to administer your system, or leave administration mode by following
the boxed instructions on page 28.