AT&T MERLIN 3070 Administration Manual page 158

d.
Assigning Lines (Attendant Consoles and Square Systems)
Although you can assign lines to whichever buttons you choose, there
are several ways in which you can assign lines to make your system easier
to administer and use. Assign identical line arrangements to all attendant
positions and, if you have a standard square system, to all voice terminals
as well. In a customized square system, assign identical line ar-
rangements to voice terminals that have common call responsibilities. If
it is convenient, have lines appear on voice terminals in the same order
as they are connected to the control unit. Once you have decided on line
assignments, write the telephone numbers on available line buttons.
e.
Call Coverage
If a voice terminal needs to cover calls to another voice terminal, write
"Cover" and the name or intercom number of the person whose calls are
to be covered on an available button (one that is not already a line or in-
tercom button). Use only a button with lights next to it. Also assign an Auto
Intercom button for each person to be covered and label the button with
the person's name. These buttons should have lights. Check the initial
feature assignment diagrams (pages 106 through 108) to see if there is
a feature that you can replace with Call Coverage. You can assign a max-
imum of six Call Coverage buttons to a voice terminal.
f.
Automatic Answering
If a voice terminal has a Hands-Free Unit, write "Auto Answer-Intercom"
on an available button with lights on the Voice Terminal Configuration
Form. If a voice terminal has a General Purpose Adapter, write "Auto
Answer-Outside" on an available button with lights on the form.
g.
Assign Other Features to Buttons
Review the initial features assignment diagrams (pages 106 through 108).
Unless you have replaced the initial features with other features, copy the
feature names onto the appropriate button label on the Voice Terminal
Configuration Form.
155