AT&T MERLIN 3070 Administration Manual page 148

With feature module 5
Hide thumbs Also See for MERLIN 3070:
Table of Contents

Advertisement

B-1 .
Line Representation
If the answer to #4 k yes, then check "Pooled" and "Dial Access + ARS"
on the System Configuration Form, and skip to #9.
Did you order any 5-button voice terminals that will be used to
5.
answer incoming calls or make outgoing calls on more than three
outside lines, or any 10-button voice terminals that will be used
to answer incoming calls or make outgoing calls on more than
eight outside lines?
B-2.
Line Representation
If the answer to #5 is no and the answer to #3 is Key, check "Square" for
the type of line representation on the System Configuration Form, and
skip to #9.
6.
Circle A or B. How would you prefer to pass a call to a voice ter-
minal that does not have a button for that particular line?
A. Use the Transfer feature.
B. Use the Line Pickup feature.
B-3.
Line Representation
If the answer to #6 is B, and the answer to #5 is no, and the answer to #3
is Key, check "Square" for the type of line representation on the System
Configuration Form, and skip to #9.
7.
Did you order any 5-button voice terminals that need to handle
calls on more than two types of lines (for example, local lines and
private lines), or any 10-button voice terminals that need to han-
dle calls on more than seven types of lines?
B-4.
Line Representation
I
If the answer to #7 is yes, check "Pooled" and "Dial Access" on the
System Configuration Form and skip to #9.
8.
Circle A or B. Which would you rather do to get an outside line?
A. Dial an access code (for example, 9) to get a line leaving more but-
tons available for features.
B. Dedicate one button to each line or group of lines, making it un-
necessary to dial an access code.
Yes
No
I
Yes
No
I
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin 1030

Table of Contents