AT&T MERLIN 3070 Administration Manual page 187

Quick Reference Guide to Administration Procedures
Procedure
PERFORM BASIC ADMINISTRATION (continued)
Assign lines and line pools to
voice terminals in pooled
systems.
(See page 37.)
Assign Dial Access to Line
Pools.
(See page 43.)
CUSTOMIZE WITH OTHER SYSTEM OPTIONS
Assign outward and toll call
restrictions to voice
terminals.
NOTE: If you do not need to
dial a toll prefix (0 or 1) to
place a long distance call,
follow steps 1 and 2 below. If
you use a toll prefix, just
follow step 2 below.
1. Set lines to identify long
distance calls by toll prefix
or by area code only.
2. Assign restrictions to voice
terminals.
(See page 47.)
Give a voice terminal the
same line and call restriction
assignments as another
voice terminal.
Set up allowed lists.
(See page 49.)
Assign allowed-list call
restrictions to voice
terminals.
(See page 51.)
Get a printout of an allowed
list.
1 8 4
(continued]
Touch
Adm Tel • Touch Auto Intercom button representing voice terminal.
• Touch line buttons.
Steady green on = line or pool assigned
Green off = line or pool not assigned
• Touch Adm Tel.
Adm Tel • Touch Auto Intercom button representing voice terminal.
• Touch same Auto Intercom button again.
• Touch line buttons.
Steady green on = dial access to pool containing line
Green off = no dial access to pool containing line
• Touch Adm Tel.
•
Call Rstr Touch line buttons.
Steady green on = toll prefix
Green off = area code on/y
•
Touch Call Rstr.
•
Touch Auto Intercom button representing voice terminal.
Adm Tel
•
Touch Call Rstr.
Steady green on = all calls permitted
Flashing green = local and intercom calls and any
Green off = intercom calls and any assigned lists
•
Touch Adm Tel.
Adm Tel • Touch Auto Intercom button representing new voice terminal.
• Touch Message.
• Touch Auto Intercom button representing voice terminal whose
assignments you want to copy.
Adm Misc • Dial #5.
• Dial list number (0 through 7), then dial entry number (0
through 9).
• Dial entry (area code and/or exchange).
• Touch Adm Misc.
Adm Misc • Dial #4, then dial list number (0 through 7).
• Touch Auto Intercom button representing voice terminal.
Steady green on = access to numbers in list
Green off = no access to numbers in list
• Touch Adm Misc.
Adm Misc • Dial #5.
• Dial list number (0 through 7).
• Dial 0#900 and wait for beep.
• Touch Adm Misc.
Then
assigned lists