Caller Id And Did Incoming Sequence Example - Altigen AltiWare ACC 5.2 Administration Manual

Caller ID and DID Incoming Sequence Example

The following is an example of a Caller ID and DID/DNIS incoming sequence window.
Figure 7. Sample Incoming Sequence window
When a call comes in, the system tries to match the incoming sequence to either the first
or second Incoming Sequence Digit String sequence. If no match is found, no Caller ID
or DID digits will be collected.
The system waits 3 seconds for the first digit to arrive. If the symbol is a
•
continues with the first sequence. Otherwise, it looks for a match to the first (and
only) symbol in the second sequence, the
For the example, let's say the system receives the
•
each digit for the next digit until all digits are received. The
between Caller ID and DID digits.
In this example, the AltiWare ACC/ACM system is expecting either the sequence
or only
#CID*DID
no Caller ID or DID digits are collected.
digits for incoming calls. If no match is found for either sequence,
DID
Chapter 12: Trunk Configuration
number.
DID/DNIS
. It then waits 1 second between
#
symbol is a delimiter
*
AltiWare ACC 5.2 Administration Manual 147
, it
#