Altigen AltiWare OE/ACC Version 5.0 Administration Manual page 72

The Triton Analog Extension telephony board has the following functional
characteristics:
• MVIP Compatible
• 256 Port Non-Blocking Switch Matrix
• Jumper-Free Configuration
• PCI Bus
• Compliant with EIA464
Note:
When the board is configured for audio input, the first port cannot
be used for an extension.
Triton Analog Trunk Board
The Triton Analog Trunk board comes in two models: Loop Start/Ground
Start (LS/GS) and Loop Start only (LS). It supports 12 analog trunks and
offers FSK Caller ID receiving, Centrex flash, and voice/silence activated
answer supervision. This board is also compatible with major PCI chassis
vendors.
LS/GS LED Indicators*
LED 1B LED 1A
ON ON
OFF OFF
ON OFF
OFF ON
* LED 2, located on the board, is a red LED for
diagnostic purposes. If it is ON, the fuse is blown.
The Triton Analog Trunk board has the following functional
characteristics:
• MVIP-compatible
• 256 Port Non-Blocking Switch Matrix
• Jumper-Free Configuration
• 32-bit, 5v PCI Bus
• Compliant with EIA464
2-6 AltiWare OE System Installation & Administration Manual
Status
Normal
No power to board
No +5V or less than
4.1V
No +12V or less than
9.2V
LS LED Indicators
LED 1B LED 1A
ON ON
OFF OFF
Status
Normal
No +5V or less than
4.1V