Triton Analog Trunk Ls/Gs Properties - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Triton Analog Trunk LS/GS Properties

To configure a Triton Analog Trunk LS/GS channel, select a Triton Analog
Trunk channel from the trunk channels list in the Trunk Configuration
window, then click the Trunk Properties button or double-click the list
entry to view the Configuration dialog box.
Figure 5. Triton Analog GSLS Trunk Properties window
Note that you can use Apply to... on this dialog box to apply changes to
other trunks of the same type.
Parameter
Interface Type
AltiWare OE System Installation & Administration Manual
Description
For the LS/GS model, can be one of the following:
• Loop Start Trunk
• Ground Start Trunk
Trunk Configuration
7-11