Installing Outlook 2000 Client On The Altiserv System - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Figure 10. Properties window, Exchange Object
3. Add <Domain>\AltiGen_<AltiServSystemName> (e.g.
AltiGen_telesystem) account to the account list.
4. Change the accounts role to Service Account Admin from the Roles
combo box (see Figure 10).
5. Repeat the above two steps for the Domain and Configuration
containers. The name of Site is ITGTEST1. The name of
Configuration is Configuration.
6. Stop and restart all the services of Exchange Server, or reboot the
Exchange server.

Installing Outlook 2000 Client on the AltiServ System

Outlook 2000 has two modes: Internet Only mode and Corporate or
Workgroup mode. To enable the Exchange Integration feature, you
MUST configure it to use Corporate or Workgroup mode.
If you have already installed Outlook 2000 in the AltiServ system, make
sure that you have installed it in the Corporate or Workgroup mode. This
is discussed on page 18-19.
AltiWare OE System Installation & Administration Manual
Data and Internet Integration
18-17