5024-001
983— Duplex Fan (D-FAN) Service Check
FRU
Check Connector
• Duplex Fan (D-FAN)
• DUP P.W.B. Board
• Duplex Relay P.W.B.
Board
Duplex Fan (D-FAN)
Action
Ensure connector CN4 is properly
connected between the D-FAN and the
duplex relay P.W.B. board.
Ensure connector duplex CN1 is properly
connected to DPCN3 on the duplex DUP
P.W.B. board.
If the problem still exists, replace the D-
FAN motor, if necessary. Then replace the
duplex DUP P.W.B. board and the duplex
relay P.W.B. board until the problem is
resolved.
Diagnostic Information
2-59