Lexmark C720 Service Manual page 95

5024-001
Message
35 Res Save Off
Deficient Memory
37 Insufficient
Collation Area
37 Insufficient
Defrag Memory
37 Insufficient
Memory
Description
The printer lacks
the memory needed
to enable Resource
Save. This
message usually
indicates that too
much memory is
allocated for one or
more of the printer
link buffers.
This message is
displayed when the
printer memory
used to store pages
is too full to collate
the print job.
Action
To enable Resource Save
after this message is
displayed, either install
additional memory or set each
link buffer to the Auto value.
After you set all link buffers to
Auto, exit the printer menus to
activate link buffer changes.
When Ready is displayed,
enable Resource Save in the
Setup Menu and modify the
link buffers again.
Press Go to clear the
message. The printer
automatically disables
Resource Save and
continues.
Press Go to print the portion of
the job already stored and
begin collating the rest of the
job.
Cancel the print job. Press
Menu> or <Menu. The Job
Menu is displayed. Press
Menu> or <Menu until Cancel
Job appears on the second
line. Press Select.
Refer to operator manual.
Refer to operator manual.
Diagnostic Information
2-15