5024-001
Duplex Interlock Switch (D-SW3, D-SW4) Removal
1. Remove the side cover low (L). See
(L) Removal" on page
2. Remove the set screw ST3X12 (1) from the interlock switch (R).
3. Remove the harness connector to the interlock switch (R).
•
D-SW3: Interlock switch senses the top unit is open.
•
D-SW4: Interlock switch senses the cover low (B) is open.
WARNING: After replacement of the interlock switch (R), confirm
the switch operates normally by opening and closing the cover
low (R).
"Duplex Side Cover Low
4-106, for more information.
Repair Information
4-135