5024-001
Waste Toner Feeder (L) Removal
1. Remove the toner cartridges.
2. Remove the OPC belt cartridge.
3. Remove the side cover (R). See
page
4-8, for more information.
4. Remove the IOD2 P.W.B. See
page
4-28, for more information.
5. Remove the base cover (R). See
on page
6. Remove the set screw ST3X1 (1) from the base frame (R).
7. Remove the screw BT3x8 (1) from cover F.
8. Remove cover F.
9. Remove the screw (1) from the waste toner holder assembly.
10. Remove the waste toner holder assembly.
11. Remove the fixing screw F3X6 (1) from the ozone fan case.
12. Remove the ozone fan case.
13. Remove the set screw ST3X6 (1) from the toner drive assembly.
4-18, for more information.
"Side Cover (R) Removal" on
"IOD2 P.W.B. Removal" on
"Base Cover (R) Removal"
Repair Information
4-91