Waste Toner Feeder (U) (Stay 'A' Assembly) Removal - Lexmark C720 Service Manual

5024-001

Waste Toner Feeder (U) (Stay 'A' Assembly) Removal

1. Remove the OPC belt cartridge.
2. Remove the toner cartridges.
3. Remove the drum cleaner.
4. Remove the side upper cover (L). See
Removal" on page
5. Remove the top cover assembly. See
Removal" on page
6. Remove the set screws ST4X6 (2) from stay 'A'.
7. Pull up the stay 'A' assembly along the guide.
8. Remove the belt sensor (PBS) from the stay 'A' assembly.
WARNING:
•
Do not touch or scratch the transfer drum.
•
Do not deform the sealing mylar of the waste toner feeder D.
4-7, for more information.
4-12, for more information.
"Upper Side Cover (L)
"Top Cover Assembly
Repair Information
4-89