Lexmark C720 Service Manual page 35

5024-001
Feature
Paper input
Optional 500
sheet input
drawers
Paper output
Paper sizes
supported
Printer memory
Interface
Description
Easy loading paper trays (no corner bucklers)
Tray 1 -
• 250 sheet drawer supporting A4, letter, based on
20 lb paper
• 50 transparencies supporting A4, letter
• 80 label sheets
• 15 envelopes
• 50 card stock sheets
• Optional 250 sheet B5 and legal input drawer
(used in Tray 1 position) provides the ability to print
to a maximum of 8.5 x 14 in. (216 x 356 mm)
Tray 2 -
500 sheet input drawer installs under the printer
supporting letter, A4, and letter
Full sensing top output bin: 250 sheets (face down)
A4, letter, legal, executive, transparencies, label and
envelope
Note: Print media other than paper, such as thick
stock, label, transparency, or envelopes should use
the upper feed (Tray 1) only.
Industry standard on 32 bit 100 MHz 100 pin SDRAM
DIMMs
Note: Some printer models may ship with more
memory. When a duplex unit is installed, 64MB is the
recommended minimum printer memory.
• High speed parallel interface (IEEE 1284 standard,
nibble byte and ECP modes)
Optional interfaces:
• Serial support for RS-232 and RS-422 with the
optional Tri-Port interface card
• Infrared
• SCSI
• LocalTalk
• Internal Solution Ports (ISP) adapter
• USB and 1284-A parallel
General Information
1-5