5024-001
IOD1 P.W.B. Removal
1. Remove the upper side cover (L). See
Removal" on page
2. Remove the top cover. See
on page
3. Remove the set screws ST3X6 (4) from the shield cover
(upper).
4. Remove the shield cover (upper).
5. Disconnect all harness connectors (16) to the IOD1 P.W.B.
6. Remove the set screws ST3X6 (6) from the IOD1 P.W.B.
7. Remove the IOD1 P.W.B.
4-26
Service Manual
4-7, for more information.
4-12, for more information.
"Upper Side Cover (L)
"Top Cover Assembly Removal"