5024-001
Duplex Paper Guide RVS Unit Removal
1. Remove the cover low (R and L). See
Low (R) Removal" on page 4-105
Low (L) Removal" on page
2. Remove the paper guide RVS IN. See
RVS IN Removal" on page
3. Remove the set screws ST3X5 (4) from the support shaft on
both sides (left & right).
In this instance, the cover low (B) assembly comes off. See
"Duplex Cover Low (B) Assembly Removal" on page
for more information.
4. Remove the support shaft from the frame.
5. Remove the retaining band from the paper guide RVS unit.
6. Remove the paper guide RVS unit from the frame.
7. Remove the harness connected to CN2 on the relay P.W.B.
"Duplex Side Cover
and
"Duplex Side Cover
4-106, for more information.
"Duplex Paper Guide
4-117, for more information.
Repair Information
4-112,
4-115