5024-001
Message
202 Paper Jam
Open Top
Cover
To locate
For details see...
the jam...
Open the
202 paper jammed in the fuser or
top cover
paper exit rollers.
1. Open the top cover and rear door,
2. Check the actuator and the paper
3. If necessary, replace the main
Note: Clear all paper from the paper
path.
remove the paper.
exit sensor (PT2).
Ensure the connector DCN14 on
the IDO1 P.W.B. board is
connected.
Replace the IDO1 P.W.B. board, if
necessary.
engine (MCTL P.W.B.) board, as
necessary.
Go to
"Paper Feed Service
Checks" on page
information.
CAUTION: The inside of the
printer may be hot. Allow the
printer to cool before touching any
internal components.
Diagnostic Information
2-77, for more
2-29