Key Lock-In Prevention Function; Keyless Access With Push-Button Start System (Outback - If Equipped) - Subaru 2013 Legacy, 2013 Outback Owner's Manual

doors from the outside using the power
door locking switches.
& Key lock-in prevention func-
tion
This function prevents the doors from
being locked under the following condi-
tions.
. The key is still in the ignition switch
(models without keyless access with
push-button start system )
. The ignition switch is in the ON
position (models with keyless access with
push-button start system )
This function s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.
NOTE
. The factory setting (default setting)
for this function is set as "operational".
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
! Behavior with key lock-in preven-
tion function operational
With the driver s door open, the doors are
automatically kept unlocked even if the
front side of the power door locking switch
is pressed.
! Behavior with key lock-in preven-
tion function non-operational
. If the lock lever is turned to the rear
( LOCK ) position with the driver s door
open and the driver s door is then closed
with the lock lever in that position, the
driver s door is locked.
. If the spare key is used to lock the
driver s door from the outside of the
vehicle, the door is locked.
Keys and doors
Keyless access with push-
button start system (Outback
– if equipped)
1) Access key (main)
2) Access key (sub)
3) Key number plate
The vehicle has two access keys and a
key number plate. For details about the
key number plate, refer to Key number
plate F2-3.
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key.
. Locking and unlocking of the doors and
rear gate
. Starting and stopping the engine. For
– CONTINUED –
2-9