Replacing Battery Of Transmitter - Subaru 2013 Legacy, 2013 Outback Owner's Manual

11-56
Maintenance and service
& Replacing battery of trans-
mitter
1. Remove the screw on the key head.
2. Open the key head using a flat-head
screwdriver.
3. Remove the transmitter case from the
key head.
4. Open the transmitter case by releasing
the hooks.
1) Negative (−) side facing up
5. Replace the old battery with a new
battery (Type CR1620 or equivalent)
making sure to install the new battery with
the negative (−) side facing up.
6. Put together the transmitter case by
fitting the hooks on the case.
7. Reinstall the transmitter case in the
key head.
8. Reinstall the screw on the key head.
After the battery is replaced, the trans-
mitter must be synchronized with the
remote keyless entry system's control
unit. Press either the " " or "
six times to synchronize the unit.
" button