Subaru 2013 Legacy, 2013 Outback Owner's Manual page 281

5-64
Audio
refer to Preparation for using the Hands-
free system F5-48.
! List phones function
The cell phone voice tags saved in the cell
phone list are displayed by using the list
phones function.
1. Select the LIST PHONES menu.
If no cell phones are registered,
EMPTY (type A audio)/ No Phones
have been paired. (type B audio) is
displayed and the mode changes to
the PHONE SETUP mode.
2. Registered cell phones are displayed
in the saved order. While displayed, if the
TUNE dial is turned, the next registered
cell phone is displayed. Press the ON
hook button to close the Hands-free
menu.
3. Select a cell phone by performing
either of the following procedures.
Operate the TUNE dial.
Press the talk switch
4. After SELECTED (type A audio)/
Phone is selected. (type B audio) is
displayed, you can select the following
menus.
.
SELECT PHONE to connect the
selected cell phone
.
CHANGE NAME (type A audio)/
Change Phone Name (type B audio) to
change the voice tag
.
DELETE
Phone (type B audio) to delete the
selected cell phone from the list
.
GO BACK to go back to the PHONE
SETUP mode
! Setting passkey
1. Select the SET PASSKEY menu.
After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by performing
one of the following procedures.
Operate the TUNE dial.
Press the talk switch
the passkey.
3. Select the CONFIRM (type A audio)/
Confirm passkey? (type B audio) menu.
The new passkey is displayed, the
passkey is changed and the mode
changes to the
.
mode.
! Deleting registered cell phone from
the list
1. Select the DELETE (type A audio)/
Delete Phone (type B audio) menu.
2. Select a cell phone to be deleted by
performing one of the following proce-
(type A audio)/ Delete
and say
PHONE SETUP
dures.
Operate the TUNE dial.
Press the talk switch
the voice tag.
Press the talk switch
the list phones function.
3. Select the CONFIRM (type A audio)/
Confirm delete phone? (type B audio)
menu.
DELETED (type A audio)/ Phone
has been deleted. (type B audio) is
displayed, the data is deleted and the
mode changes to the PHONE SET-
UP mode.
! Turning the Hands-free power on/off
(type B audio)
You can turn the Hands-free power on or
off. If the Hands-free power is ON, the
registered cell phones are automatically
connected to the system when the ignition
switch is turned to the Acc or ON
position.
1. Select the Hands-free Power /
Handsfree Power menu.
2. To turn off the Hands-free power when
the Hands-free power is ON, perform
either of the following procedures.
Press the talk switch
Turn off .
Select Turn off by operating the
and say
and use
and say