Acc; Start; Key Reminder Chime; Ignition Switch Light - Subaru 2013 Legacy, 2013 Outback Owner's Manual

3-4
Instruments and controls
while turning it (all models) and the select
lever is in the P position (AT models and
CVT models).
& Acc
In this position the electrical accessories
(radio, accessory power outlet, etc.) can
be used.
& ON
This is the normal operating position after
the engine is started.
& START
CAUTION
Do not turn the ignition switch to the
"START" position while the engine
is running.
The engine is started in this position. The
starter cranks the engine to start it. When
the key is released (after the engine has
started), the key automatically returns to
the ON position.
If the engine does not start with your
registered key, pull out the key once (at
this time, the security indicator light will
blink), reinsert the key in the ignition
switch and then try to start the engine
again.
NOTE
The engine may not start in the follow-
ing cases:
. The key grip is touching another key
or a metallic key holder.
. The key is near another key that
contains an immobilizer transponder.
. The key is near or touching another
transmitter.
& Key reminder chime
The reminder chime sounds when the
driver s door opens and the key is in the
LOCK or Acc positions. The chime
stops when the ignition switch is turned
to the ON position or the key is removed
from the ignition switch.
& Ignition switch light
For easy access to the ignition switch in
the dark, the ignition switch light illumi-
nates when driver s door is opened or
when the driver s door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for approxi-
mately 30 seconds and gradually turns off
under the following conditions.
. When the driver s door is closed
. When the doors are unlocked using the
remote keyless entry transmitter
The light gradually turns off under the
following conditions.
. When the ignition switch is turned to
the ON position
. When the doors are locked using the
remote keyless entry transmitter