Fluids; Engine Coolant - Subaru 2013 Legacy, 2013 Outback Owner's Manual

12-8
Specifications
& Fluids
Fluid
Automatic transmission fluid (5AT
models)
Continuously variable transmission
fluid (CVT models)
Power steering fluid
Brake fluid
Clutch fluid (MT models)
*1: Use one of the indicated types of fluid.
*2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors.
*3: For more details about maintenance and service, refer to the indicated section.
& Engine coolant
Vehicle model
2.5 L models
3.6 L models
The indicated coolant quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors. For more details about maintenance and service, refer to Cooling system F11-15.
1
Fluid type*
· SUBARU ATF
· IDEMITSU ATF HP
Consult your SUBARU dealer.
· SUBARU ATF
· IDEMITSU ATF HP
· Dexron III Type Automatic
Transmission Fluid
FMVSS No. 116, fresh DOT 3 or DOT 4
brake fluid
FMVSS No. 116, fresh DOT 3 or DOT 4
brake fluid
MT models
CVT models
Fluid capacity*
10.4 US qt (9.8 liters, 8.6 Imp qt)
13.1 US qt (12.4 liters, 10.9 Imp qt)
0.7 US qt (0.7 liters, 0.6 Imp qt)
Coolant capacity
8.0 US qt (7.6 liters, 6.7 Imp qt)
7.9 US qt (7.5 liters, 6.6 Imp qt)
6.9 US qt (6.5 liters, 5.7 Imp qt)
2
Remarks*
Automatic transmission fluid
F11-19
Continuously variable trans-
mission fluid F11-21
· Power steering F7-27
· Power steering fluid F11-22
Brake fluid F11-23
Clutch fluid (MT models) F11-
24
Coolant type
SUBARU Super Coolant
3