Subaru 2013 Legacy, 2013 Outback Owner's Manual page 276

7. Select the CONFIRM menu.
The phone number is then regis-
tered and STORED (type A audio)/
Phone number stored. (type B audio)
is displayed.
! Registering from call back
1. Select the CALLBACK menu.
2. Select the phone number by operating
the TUNE dial.
3. Select the STORE menu.
4. Select the CONFIRM (type A audio)/
Confirm store number? (type B audio)
menu.
5. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by operating the TUNE dial.
Press the talk switch
6. Say the name (voice tag) to be
registered.
7. Select the CONFIRM menu.
The phone number is then regis-
tered and STORED (type A audio)/
Phone number stored. (type B audio)
is displayed.
! Registering speed dial
1. After registering phonebook data, per-
form either of the following procedures.
Select the SPEED DIAL menu by
operating the TUNE dial.
Press the talk switch
SET SPEED DIAL .
2. Press the preset button (from
) to which you want to register the
phone number.
NOTE
If the number to be used is already
registered in speed dial, "OVER-
WRITE?" will be displayed. Select the
"CONFIRM" menu to overwrite, or
select the "GO BACK" menu to cancel.
! List names function
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
.
1. Select the LIST NAMES menu.
2. Choose the registered data by per-
forming either of the following procedures.
Press the talk switch
Operate the TUNE dial (type A
audio only).
After SELECTED is displayed, you can
choose the following menus.
.
DIAL to make a phone call
.
CHANGE NAME to change the name
(voice tag)
.
SET SPD DIAL / SET SPEED DIAL /
Speed Dial to set the speed dial
and say
.
DELETE ENTRY to delete the name
(voice tag) from the phonebook
to
.
GO BACK to go back to the menu
mode
.
HELP to listen to the help guidance
(only when using the voice command
system)
NOTE
. After "LIST NAMES" is selected, if
the OFF hook switch
selected number is called.
. After "LIST NAMES" is selected, if
no operation is performed, the mem-
ories are displayed and voice tags are
spoken. After all memories/voice tags
are displayed/spoken, "END OF LIST"
is displayed and the mode changes to
the "PHONE BOOK" menu mode.
! Changing voice tag
1. Select the PHONE BOOK menu.
.
2. Select the CHANGE NAME menu.
3. Select the phone number by perform-
ing one of the following procedures.
Operate the TUNE dial.
Press the talk switch
the voice tag.
Press the talk switch
5-59
Audio
is pushed, the
and say
, say List
– CONTINUED –