Rear Gate (Outback) - If The Rear Gate Cannot Be Unlocked - Subaru 2013 Legacy, 2013 Outback Owner's Manual

9-22
In case of emergency
To open the trunk lid, insert the key into
the key cylinder and turn it clockwise.
Rear gate (Outback) – if the
rear gate cannot be unlocked
In the event that you cannot unlock the
rear gate by operating the power door
locking switches, keyless access function
or the remote keyless entry system, you
can unlock it from inside the cargo area.
1. Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver.
2. Locate the rear gate lock release lever
behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock
release lever with your fingers be-
cause doing so may cause an injury.
Always use a flat-head screwdriver
or a similar tool.
3. To unlock the rear gate, turn the lever
to the right position using a flat-head
screwdriver or a similar tool.
4. Open the rear gate from outside by
raising the rear gate handle.