Scan - Subaru 2013 Legacy, 2013 Outback Owner's Manual

Type A audio:
Type B audio:
NOTE
. The "RDM" indication refers to the
random playback of the tracks. It
randomly repeats the tracks on the
CD. It is possible to select the function
when formats other than the MP3/WMA/
AAC format CD is playing.
. The "FOLDER RDM" (type A audio)/
"FOLDER" (type B audio) indication
refers to the random playback in the
folder. It randomly repeats the tracks in
the folder. It is possible to select the
function when an MP3/WMA/AAC for-
mat track is playing.
. The "ALL RDM" (type A audio)/
"ALL" (type B audio) indication refers
to the random playback of a disc. It
randomly repeats the tracks on the CD.
It is possible to select the function
when an MP3/WMA/AAC format track is
playing.
To cancel the random playback mode,
press the random button and select
CANCEL.
The RDM indication will turn off, and the
normal playback mode will be resumed.
NOTE
Random playback will be cancelled if
you perform any of the following steps:
. Press the " " button.
. Press the "SCAN" button.
. Press the " " or " " side of the
"FOLDER" button when an MP3/WMA/
AAC format track is playing (type A
audio).
. Turn the "TUNE" dial during random
playback of the disc (type B audio).
& Scan
Type A audio
Type B audio
The scan mode lets you listen to the first
10 seconds of each track in succession.
Press the SCAN button to start scanning
Audio
upward beginning with the track following
the currently selected one.
After all tracks in the disk/folder have been
scanned, normal playback will be re-
sumed. To cancel the scan mode, press
the SCAN button again.
NOTE
The scan mode will be cancelled if you
perform any of the following steps.
. Press the "RPT/RDM" button (type A
audio).
. Press the "RPT" button (type B
audio).
. Press the "RDM" button (type B
audio).
. Turn the "TUNE" dial.
. Press the " " or " " side of the
"FOLDER" button (type A audio).
. Press the " " button.
. Press the " " or " " side of the
"SEEK" button.
. Select the radio or AUX mode.
. Turn off the power of the audio
equipment.
. Turn the ignition switch to the
"LOCK"/"OFF" position.
– CONTINUED –
5-23