Illumination Brightness Control; Front Fog Light Switch (If Equipped) - Subaru 2013 Legacy, 2013 Outback Owner's Manual

3-44
Instruments and controls
Illumination brightness con-
trol
The illumination brightness of the clock
display, audio, air conditioner, multi func-
tion display and meter/gauge dims under
the following conditions.
. when the light switch is in the
position
. when the light switch is in the AUTO
position and the headlights illuminate
automatically
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the "LOCK"/"OFF" position.
or
Front fog light switch
(if equipped)
1) Headlight switch
2) Fog light switch
The front fog lights will turn on when the
fog light switch is placed in the
position while the headlights are in the
following condition.
. while the headlight switch is in the
position
. while the headlight switch is in the
AUTO position and the headlights turn
on automatically
To turn off the front fog lights, turn the
switch back down to the position.